BEFORE RIDING
Charging the battery
Your product may not have a fully charged battery; therefore it is a good idea to charge the battery prior to use .
●Recharge time:2hours
Depending on level of depletion
●Fully charge battery before storing
●When the bike is not in regular use, recharge the
battery at least once a month normal until it is
resumed.
Note: Make sure power is turned OFF when anit is not is ues.
1.Turn power OFF before charging. Plug the charger into the charger port to charge unit.
2.Pulg the charger into a wall outlet. If the lights on charger do not light up, check the power to the outlet. If
necessary, try a different outlet.
USAGE
To star the unit, turn the power switch ON. Rotate the start-up key, Place both hands on the handle bars and press
the push button throttle.
NOTE: keep both feet on the foot pegs when unit is in motion.
To stop the unit, release the push button throttle and apply the brake until the unit comes to a complete stop.
REPAIR AND MAIN TENANCE
Make sure the power switch is turned OFF
Battery care and disposal
Do not store the battery in temperatures above 60° or below-10 ℃.
Charger
The charger supplied with the product should be regularly examined for damage to the cord, plug, enclosure and
other parts, and, in the event of such damage, the product must not be charged until it has been repaired or replaced.
Use ONLY with the recommended charger.
●Run time: About 60 minutes of continuous ride time.
Run time may vary depending on riding conditions.
(climate and/or proper maintenance.)
●Average battery life: 500charge/discharge cycles
●To ensure long battery life.do not store the battery in
temperatures above 60°or below -10 ℃.
7