Assembling Your L10; First Ride - Infiniton CITYJAM PRO Manual De Usuario

4 Assembling Your L10

1. Unfold the handlebar stem and fasten
it. Then unfold the CITYJAM Pro to
support the CITYJAM Pro.
3. Install six screws (two on each side)
with the included hex wrench.
07
2. Firmly connect the wires inside the
handle and the stem. Slide the handle
onto the stem. Be aware of the correct
orientation.
Headlight
toward front
4. Verify that your CITYJAM
Pro can be powered on and
off.

5 First Ride

There are safety risks when learning to ride the
Riding
Safety via the App before your first ride.
For your safety, your new
after Power ON.
CITYJAM Pro
Until activated, the
ridden with full function. Install the App on your mobile device (with Bluetooth 4.0 or
above), connect to the CITYJAM Pro
L10 Scooter App
activate your CITYJAM Pro
Scan the QR code to download the App.
Install the App and register/login.
1
Click "Vehicle"→"Scan for Vehicle" to connect
3
to your CITYJAM Pro .
The CITYJAM Pro will beep when the connection
is successful. The Bluetooth icon will stop
blinking and remain illuminated.
Follow the App instructions to active the CITYJAM Pro and learn how to ride safely.
4
CITYJAM Pro Have fun!
CITYJAM Pro . You must read the
CITYJAM Pro
is not activated and will beep occasionally
maintains very low riding speed, and cannot be
with Bluetooth, and follow the App instructions to
and enjoy the full performance.
Power on the CITYJAM Pro. A blinking
2
Bluetooth icon indicates the CITYJAM Pro
is waiting
for a connection.
Vehic le Fans Mom ents D isc over Me
08