Reversing The Door - Infiniton FGC-852HB Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Reversing the door

The side at which the door opens
can be changed, from the right side
(as supplied) to the left side, if the
installation site requires.
Warning!
When reversing the door,
the appliance must not be connected
to the mains. Ensure that the plug is
removed from the mains socket.
Tools you will need
Not provided
8mm socket wrench
Cross-shaped screwdriver
When required, tilt the refrigerator
back in order to gain access to the
base, you should rest the appliance
on soft foam packaging or similar
material to avoid damaging the
backboard of the refrigerator. To
reverse the door, the following steps
are generally recommended.
Different models may correspond to
different pictures. Models will be
written in the picture. If some parts
are not shown in the picture, please
ignore the relevant description.
1. Stand the refrigerator upright.
Open the upper door to take out all
door racks (to avoid racks damaged)
and then close the door.
Thin-blade screwdriver
8mm wrench
Door racks
2.Remove part
①,
the top right side of refrigerator.
3.Remove screws
.When the refrigerator with
display on door, you need to pass
connector
through the hole of
hinge
②.
(Please hold upper door by
hand when installing).
Special flange
Upper hinge
MODEL WITHOUT DISPLAY
Special flange
Upper hinge
Electrical connector
MODEL WITH DISPLAY
loose part
from
Self-tapping
screws
Upper hinge cover
and hinge
screws
screws
10

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Fgc-853dx84365461973628436546197379

Tabla de contenido