Important Safeguards; Important Safety Instructions - noken ACRO COMPACT 100278528 Manual De Instrucciones

Ocultar thumbs Ver también para ACRO COMPACT 100278528:
Tabla de contenido

Publicidad

EN

IMPORTANT SAFEGUARDS

When using electrical products, especially when children are present, basic safety precautions should always be
followed, including the following:
1.The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they have been given supervision or instruction.
2.Children being supervised not to play with the appliance.
3.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concer-
ning use of the appliance in a safe way and understand the hazards involved.
4.Children shall not play with the appliance.
5.Cleaning and user maintenance shall not be made by children without supervision.
READ ALL INSTRUCTIONS BEFORE USING
DANGER - To reduce the risk of electrocution:
1. Do not use while bathing.
2. Do not place or store product where it can fall or be pulled into a tub or sink.
3. Do not place in or drop into water or other liquid.
4. Do not reach for a product that has fallen into water. Unplug immediately.
5. Do not wash the main unit or electrical plug with water or detergent.
6. Do not handle the electrical plug with wet hands.
7. Do not put a hand or other staff over the outlet of air dryer or block the outlet of air dryer.
8. Never disassemble,repair or modify this product.
9. During installation, disassembly, repaire and maintenance of the product,the power plug must be switched off and
water supply be shut off.
WARNING - To reduce the risk of burns, electrocution, fire, or injury to persons:
1. Closed supervision is necessary when this product is used by, on, or near children o r invalids.
2. Use this product only for its intended use as described in this manual. Do not use attachments not recommended
by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the product to a service center for examination and repair.
4. If the supply cord is damaged,it must be replaced by the manufacturer,its service agent or similarly qualified per-
sons in order to avoid a hazard.
5. Keep the cord away from heated surfaces.
6. Never use while sleeping or drowsy.
7. Never drop or insert any object into any opening or hose.
8. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being adminis-
tered.
9. Connect this product to a properly grounded outlet only. See Grounding Instructions.
10. Do not throw cigarettes and other burning stuff into toilet, otherwise it might cause fire.
11.This product is electric appliance, so it must be placed far away from water. Please don't drench urine and other
liquid to it.
12.It is prohibited to use other electric appliances in the same socket.
13.It is forbidden to use the power extension or unstable loose outlet.
14.The old aging water supply hose can not be used, otherwise it might cause leakage, fire or electrical shock.Insta-
llation of the bidet seat should include specified components and new water supply hose.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION – Indicates that failure to follow the instruction may cause body injury or property damage:
1. Do not install or use the product in wet places as steam room etc.
2. It is recommended to use water-proof electrical outlet which should be lnstalled in the place where is not easily got
wet.
3. This product should be used with 220-240V,50/60Hz electrical current only,load current is at least 10A. Power plug
must be equipped with ground fault circuit interrupter or ground fault electrical leakage protector or similar high sensi-
tive, rapid type leakage switch (Rated sensitive current under 10mA).
4. The installation should be in accordance with the wiring regulations in force at your country. Make sure the circuit
4

Publicidad

Tabla de contenido
loading

Tabla de contenido