Kohler K-1679 Guia De Instalacion página 16

10. Operating the Steam Control
Steam Control Operation
NOTE: The clock is always displayed in the LED window when the steam is not in use.
Push the "On/Off" button to start the steam.
When the button is pushed the green LED light on the "On/Off" button turns on and remains on
until the unit is turned off. The LED window reads "On" for the first three minutes of operation if
the factory settings are not changed.
The current temperature is then displayed until the target temperature is reached.
Push the "On/Off" button again to stop the steam. The green LED "On/Off" button turns off and
the LED window reads "Off" for 5 seconds, then returns to the time of day.
NOTE: When turning the unit on, the steam duration and temperature settings will be based upon the
previous user settings. The settings of a new control unit are 113°F (45°C) for 15 minutes.
Steam Control Adjustments
Push the "On/Off" button to start the steam. The control window will display "On" for three
minutes. If nothing else is adjusted, the clock time will then be displayed.
Push the temperature icon and the LED flashes the previous setting.
To adjust the setting press the up arrow to increase the temperature and the down arrow to decrease
the temperature. The maximum allowed temperature is 125°F (52°C). The minimum operating
temperature is 90°F (32°C).
After 5 seconds, the flashing stops and ambient temperature is displayed as it changes to the target
temperature.
Push the timer icon and the LED flashes the previous setting. Press the up or down icons to adjust
the setting up or down. After 5 seconds the flashing stops and the timer setting is displayed. If the
up or down icons are not pushed the time will continue to count down. The minimum operating
time is 10 minutes, the maximum operating time is 20 minutes.
Push the clock icon and the LED flashes the current time of day setting. Press the up or down icons
to adjust the clock. After 5 seconds, the flashing stops and the set time is displayed.
Press the "On/Off" button to stop the steam and exit at any time. The control window will display
"Off" for five seconds and default to the clock time.
To toggle the temperature reading between Fahrenheit and Celsius, push and hold the temperature
icon in 3 seconds.
The Power Clean Function
1045789-2-C
Increase
Clock
Timer
Window
Decrease
On/Off
Temperature
16 Kohler Co.