Tools And Materials; Before You Begin - Kohler K-3084 Guia De Instalacion

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Template
Safety
(supplied)
Glasses
Tape Sealant
Measure

Before You Begin

Observe all local plumbing and building codes.
Inspect the drain and supply tubing. Replace if necessary.
Prior to installation, unpack the new sink and inspect for damage.
To prevent damage, return the sink to its original packaging until
installation.
These installation instructions assume a wood or laminate
countertop. If you have a stone countertop, specialized tools will
be required to cut the opening.
Because of the varying thickness of different countertop materials,
fasteners are not included with this sink. Determine the length of
the fastener by measuring the thickness of the countertop and
adding 3/4" (2 cm) to the measurement. Then purchase four
#10-32 x (determined length) fasteners for this installation.
This sink is not intended for undercounter installation.
Before proceeding, determine how far the sink will extend
beyond the front of the cabinet. It should extend a minimum of
1/2" (1.3 cm) and a maximum of 2-3/4" (7 cm).
1036543-2-B
Plus:
1/2" or larger drill bit
Jigsaw
#10-32 x (determined
Pencil
length) fastener
Gloves
Scissors
Drill
2 Kohler Co.