Operating Instructions For High Pressure Mode - Kärcher HD 2.0/1000 Dual Mister Manual Del Usuario

OPERATING INSTRUCTIONS FOR HIGH PRESSURE MODE

Cold
Water
Source
Garden
Hose
STEP 1: Connect ½" hose to cold
water inlet.
Spray
Gun
Safety
Latch
High
Pressure Hose
STEP 4: Attach the high pressure
hose to the spray gun.
STEP 7: Close metering valve to
purge hose.
CAUTION: If valve is open, pres-
sure wont reach rate.
ATTENTION: Si la soupape est
ouverte, la pression n'atteindra
pas le taux.
Garden
Hose
STEP 2: Check inlets filters, remove
debris, then connect the garden
hose to pump water inlet.
CAUTION: Do not run the pump
without water or pump damage
will result.
ATTENTION: Ne pas faire fonc-
tionner la pompe sans eau pour
éviter d'endommager la pompe.
Gun/Wand
Wand
STEP 5: Attach wand to spray gun.
STEP 8: Connect to apropriate
power supply. Push reset button
on GFCI.
Manual Dual Mister 9.808-246.0 - E
High
Pressure
Pump
Hose
Water Inlet
Coupler Collar
STEP 3: Connect ¼" high pressure
hose to the discharge nipple. Push
coupler collar forward until secure.
Pressure
Spray
Nozzle
STEP 6: Pull spring-loaded collar
of the wand coupler back to insert
your choice of pressure nozzle.
STEP 9: Start up the machine.
Discharge
Nipple
Wand
Coupler
7