camry CR 7960 Manual De Uso página 4

21.Never use the device in high humidity rooms – bathroom, shower room, swimming
pools etc. The humidity can cause short circuit, and effect in damaging the device.
22.The operating device needs to be under supervision and in sight all the time. If you
are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is
not used, the power plug has to be removed from the power outlet.
23.Do not connect the device to the automatic switching device, for example
temperature controlling device or time switch.
24.Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should
be kept at least one meter from the fan heater.
25.Use only original accessories, filters, and spare parts.
DESCRIPTION OF THE DEVICE
Figure 1
A) air outlet E) Hepa filter
B) control panel F) pre-filter
C) housing G) cover
D) carbon filter
Figure 2
A) Light sensor F) Switch
B) Night mode G) Color air quality indicator
C) ionization H) timer
D) Auto mode I) reset
E) blowing speed J) key lock
USING THE DEVICE
1. Install the filters according to figure 1
2. Insert the plug into the contact.
3. Turn on the device by pressing (2-F).
4. Turn on the Auto (2-D) button or select the desired manual speed (2-D).
5. Timer you can choose the right time (2-H)
AUTO function
The device automatically analyze the air quality and selects the right blowing force.
Green-air color very good quality
Yellow - medium quality air
Red-hair color heavily contaminated
Timer
The device has a timer. (1h, 4h, 8h, 12h). Button (2-H. Lighted LED indicates selected time
Reset (2-I)
The RESET function reminds the user to replace the filter. Filters must be replaced after 2160 operating hours or after light indicator lighted
After replace the filters (fig 3) hold the button (2-I) for about 3 seconds.
WARNING
Do not press the RESET button without the lighted light This will clear the working time and delay the filter replacement information, which
can lead to ineffective operation or damage to the device.
Night mode
The device has a night mode to silence operation. The device has a dusk sensor that will start automatically when a dusk is detected or it
returns to daylight when the light is detected. Night mode can also be activated by pressing (2-B)
CLEANING AND MAINTENANCE
1. Make sure the fan heater is not hot.
2. Before cleaning the device remove the plug from the electrical socket.
3. Keep the air inlet and outlet openings clean. Do not allow dust to collect on the openings.
4. Clean the housing using only dry or moist cloth.
5. Do not immerse the device in water!
TECHNICAL DATA
Voltage: 220-240V ~50Hz
Power: 45W
wheight 5,2kg
dimensions:321x210x523
Noise level 40-55dB
Maximum room volume 30m
Efficiency 170m3/h
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should
be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the
common waste bin.
4