Fan Installation - CFM CF Serie Manual De Instalación Y Manteniemiento

The delivery set includes:
• Fan assembly -1
• Grille - 1
WARNING
Disconnect and lock out power supply before performing any installation work.
Working on or near energized equipment could result in death or serious injury.
STEP 1. INSTALL FAN ASSEMBLY
Position the fan assembly so the bottom edge is flush with the finished ceiling. Secure to joist with
wood screws (not provided).
STEP 2. CONNECT DUCT
Using the recommended duct size, connect duct to the damper/duct connector, and run duct to
an exterior roof or wall cap using the shortest, straightest duct routing possible. Ensure all duct
connections are airtight.
STEP 3. CONNECT WIRING
Refer to wiring diagram on page 4. Reattach all electrical box covers before applying power.
STEP 4. INSTALL GRILLE
Pinch the springs on the sides of grille and insert them into the slots in the housing. Firmly push
the grille against the ceiling to secure (Figure 1).
CF BATHROOM EXHAUST FANS

FAN INSTALLATION

CF50 & CF70 Bathroom Exhaust Fans
3
Figure 1