HOMEDIAGNOSTICS TRUEresult Guia Del Usuario página 23

7. With Strip still in Meter, touch edge
of Test Strip Sample Tip to blood
drop and hold. Allow blood to be
drawn into Strip
until Meter beeps.
Note: If Meter does not beep or begin
testing after touching blood drop to Strip
Sample Tip, discard Strip. Repeat test with
new Strip and new blood drop. If problem
persists, see Troubleshooting.
8. Dashes appear across Display to
show Meter is testing.
9. After the test is finished, result is
displayed. The Strip Release Button
flashes. Record result in log book.
10. Hold Meter with Strip pointing
down. Press Strip Release Button to
discard Strip. Meter turns off.
Result is stored in Memory with
day, date and time.
Note: Removing Strip before result
displays cancels the test. An
error message appears and
result is not stored in
Memory. Retest with a new
Strip and do not remove
before result is displayed.
21