Leica SUMMARON-M 1:5,6/28mm Manual De Instrucciones página 15

Bayonet fitting
Filter mount
Lens hood
Viewfinder
Finish
Dimensions and weight
Length of the bayonet fitting con-
tact surface
Largest diameter
Weight
Compatible cameras
For 35mm (24 x 36mm):
1
The 6 bit lens identification bar code (6) situated on the bayonet flange enables the digital Leica M models
2
to identify the attached type of lens. This information is utilized by the cameras to optimize exposure and
image data.
All Leica M cameras without 28 mm frame lines, except for those with 0.85x viewfinder, the M3 and the
3
previous MP (professional version of the M3), can be equipped with this by the Customer Care department
of Leica Camera AG (Address, see p. 10, or warranty card) (then appears together with the 90 mm frame
lines).
Use on the Leica M8 is not recommended because the necessary UV/IR corrections filters are not
4
available.
Leica M quick-change bayonet with 6 bit lens
identification bar code for digital M models
Internal thread for screw-on filter E34, with
non-rotating focusing mount
Clip-on (in delivery scope)
Camera viewfinder
3
Silver chrome finish
approx. 18mm
approx. 51mm
approx. 165g
All Leica M cameras
4
EN
2
13