Kohler K-702400 Guia De Instalacion página 14

Wall Jamb Cover
Inside Handle
Spacer
Handle
Setscrew
Outside
Handle
Logo
10. Install the Wall Jamb Covers
Install the wall jamb covers to the top of the wall jambs. Flat edges should be toward the wall.
11. Install the Handles
CAUTION: Risk of product damage. If the handles are tightened to the tempered glass without the
spacers the glass will shatter. When reassembling the door handle assembly, it is critical the
provided spacers be re-installed. Without the spacers there will be metal-on-glass contact.
The handle comes pre-assembled and must be disassembled prior to installation on the shower door.
Unscrew handle with no logo from the pre-assembled handle assembly.
Remove the spacer from the handle setscrew.
Slide the assembled handle setscrew and handle assembly (logo facing the outside of the shower)
through the hole in the glass shower door.
Reinstall the spacer on the handle setscrew.
Screw the other non-logo handle onto the handle setscrew.
Fully tighten both handles evenly making sure the logo is properly orientated.
1036565-2-D
Wall Jamb
Hole in glass
Spacer
14
Bottom View
Wall Jamb Cover
Kohler Co.