IMPORTANT SAFETY INFORMATION
When using electrical products basic precautions should always be followed including the
following:
a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper
installation.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of
heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on the wire.
g) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric
shock it should not be played with or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from the cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
l) Do not cover the product with cloth, paper or any material not part of the product when in use.
m) This product is equipped with push-in type lamps. Do not twist lamps.
n) This product employs overload protection(fuse).A blown fuse indicates an overload or short-
circuit situation. If the fuse blows unplug the product from the outlet. Also unplug any additional
strings or products that may be attached to the product. Replace the fuse as per the user
servicing instruction (follow product marking for proper fuse rating)and check the product. If
the replacement fuse blows , a short-circuit may be present and the product should be
discarded .
o) Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
Caution: To reduce the risk of electric shock: a) Do not install on trees having needles, leaves or
branch coverings of metal or material which looks like metal. b) Do not mount on support strings in
a manner that can cut or damage wire insulation.
Use and Care Instructions
a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do not
place on live trees in which the needles are brown or break off easily. Keep the tree holder filled
with water (for live trees).
b) If the product is placed on a tree, the tree should be well secured and stable.
c) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged
or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections,
or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is placed, including
tree, branches, or bushes, to avoid any undue strain or stress on the product conductors,
connections, and wires.
e) When not in use, store neatly in a cool, dry location protected from sunlight.
f) The LED has polarity. Do not deliberately change the direction of the LED in the lampholder.
User Servicing Instructions
Replace the fuse:
a)
Grasp plug and remove from receptacle or other outlet device. Do not unplug
by pulling on cord.
b)
Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
c)
Remove the fuse carefully. Turn plug over to remove the fuse.
d)
RISK OF FIRE. Replace fuse with only 3 Amp,125 Volt fuse provided with product.
e)
Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
3