IKEA TVATTAD Manual De Instrucciones página 18

ENGLISH
Spin and addi‐
tional options
touch button
10
Temperature
touch button
11
Mode touch but‐
12
ton
Multilingual badges
When you set a programme, the appliance automatically sets the
maximum spin speed allowed, except for programme Denim.
With this option you can decrease the default spin speed.
Touch repeatedly this button to:
• Decrease the spin speed. The display shows only the spin
speeds available for the set programme.
• Additional spin options No Spin
Set this option to deactivate all spin phases. The appliance
performs the only draining phase of the selected washing
programme. Set this option for very delicate fabrics. The rin‐
ses phase uses more water for some washing programmes
• Activate the Rinse Hold
The final spin is not performed. The water of the last rinse is
not drained out to prevent the fabrics from creasing. The
washing programme ends with water in the drum.
The indicator
drum turns regularly to reduce creasing. You must drain the
water to unlock the door.
If you touch the button
ning phase and drains the water.
The appliance empties the water out automatically
after 18 hours approximately.
When you select a washing programme, the appliance automati‐
cally proposes a default temperature. With this option you can
change the temperature.
The indicator of the set temperature comes on.
The indicator = cold water.
Thanks to this button, a cycle can perform:
• Only washing:
• Washing and drying:
• Only drying:
option.
is on display. The door stays locked and the
, the appliance performs the spin‐
indicator is on (default mode).
and indicators are on.
indicator is on.
Adhesive badges in different languages are
supplied with the appliance.
The desired badge can be glued around the
programme knob.
.
18