Installation Of The Wired Controller - Giatsu PREMIUM R32 GIA-DI-18PRER32 Manual De Usuario E Instalacion

Installation Instructions
4. Wiring of the Power Cord
CAUTION!
The power supply for each indoor unit must be uniform.
● Dismantle the cover of the electric box of the indoor unit.
● Let the power cord go through the rubber ring.
● Connect the wiring (communication) through the piping
hole of the chassis and the bottom of the appliance
upward, then connect the brown wire to the terminal
board "3"; black wire(the communication wire) to the
terminal board "2"; blue wire to the box. Clamp them
with the corresponding wire clamp packed in the chassis.
● Fix the power cord tightly with the binding wire.

Installation of the Wired Controller

Refer to the Installation Manual of the wired controller for more details.
N(1)
Outdoor unit connection
25
2 3
blue black brown
Fig.32
yellow-
green