Mobridge M1000-C-BT-PUG1 Instrucciones De Instalación página 4

Kit Contents
• Bluetooth ECU
• Microphone
• Vehicle Interface Loom
Installation And Coding Procedure
• Switch of the ignition and all electrical components.
• Take the head unit out of the dashboard.
• Install the extension harness to the head unit ( (fi g 01)
• Install the microphone and connect it to the ECU.
• Install the ECU at an open space in the dashboard.
• After installation of bluetooth kit turn on car ignition.
• Wait 1 minute and "Diagnostic Session Active" will appear on display this is an indication that the car is now
coded.
• Once the car has been coded it is recommend that you turn off ignition and wait 5 minutes for the car to be fully
coded.
This end into head unit
Peugeot Rd4 Head Unit
Bluetooth Gateway
Bluetooth Gateway
• Operation Manual
• Velcro Pads
These connections to mObridge ECU module
This end to car harness
Install the extension harness to the head unit
Installation Instructions
M1000-C-BT-PUG1
Required
• Panel Removal Tools
• Torx Screwdriver
Installation Instructions
EN
Version 0.1
FIG 01