Axxess XSVI-1731-NAV Instrucciones De Instalación página 3

Installing the XSVI-1731-NAV
With the key in the off position:
• Connect the XSVI-1731-NAV harness into the interface, and then to the harness in
the vehicle.
®
XSVI-1731-NAV
Initializing the XSVI-1731-NAV
Attention! If the interface loses power for any reason, the following steps will need to be
performed again. Also, if installing an ASWC-1 connect it after you initialize and test the
interface/radio, with the key in the off position.
• Turn the key (or push-to-start button) to the ignition position and wait until the radio
comes on.
Note: If the radio does not come on within 60 seconds, turn the key to the off
position, disconnect the interface, check all connections, reconnect the interface,
and then try again.
• Turn the key to the off position, and then to the accessory position. Test all functions
of the installation for proper operation, before reassembling the dash.
3