Aqua Medic Ocean Runner OR 3500 Manual De Instrucciones página 7

1. Features
The Ocean Runner series of magnetically coupled centrifugal pumps are very quiet in operation.
They have fully encapsulated synchronous motors and can be operated completely safely either
submerged or out of water.
The polished ceramic shaft and bearing is practically wear resistant, ensuring a long operating life.
An integrated thermal overheat protection device prevents damage to the windings should the
impeller rotation be impeded. The pumps can easily be taken apart for cleaning. All materials are
salt water resistant.
2. Technical Data
Type:
Voltage (see label on the pump):
Power consumption:
Max. flow l/hr. (litres/min.):
Maximum head:
Connection pressure side
(male thread):
Connection suction side
(male thread):
Cable length (m):
Protection class:
Protection rating:
Max. depth:
Max. water temperature:
4
3,5
3
2,5
2
1,5
1
0,5
0
0 1000
OR 3500 – 3 OR 6500 – 4
Fig. 1: Operating capacity of the Ocean Runner pumps measured with unreduced outlet
3. Connections
Suction side: The suction side may be connected with flexible hose, using the hose fitting (Fig. 2,
No. 13) included. As another option, the male thread of the pump housing (Fig. 2, No. 7) can be
connected to a standard PVC fitting and pipe. The respective sizes are shown in table 1.
Pressure side: The pressure side can be connected with a flexible hose, using the hose fitting (Fig.
2, No. 15/16) included. This hose fitting must also to be fitted if the pump is used as a pure current
pump.
Ocean Runner OR 3500
230 V~/50 Hz
65 Watt
3,500 (58)
3.2 m
¾" alternatively:
adhesive fitting DN25
1"
3
I
IP 68
1 m ,
1 m
35° C
Ocean Runner
2000 3000 4000
Flow (l/h)
Ocean Runner OR 6500
230 V~/50 Hz
95 Watt at 180 cm
6,500 (108)
3.8 m
1"
1¼"
3
I
IP 68
1 m ,
∇
1 m
35° C
5000 6000 7000
∇