Intended Use; Improper Use; Danger Zones - EGAmaster 79632 Manual De Instrucciones

Skilled personnel only is allowed to operate the machine.
This machine is designed for the use in industry and craft, for drilling material with magnetizable
surface with core drills up to 52 mm diameter, spiral drills up to 13 mm. It is applicable in steelwork
(especially for drilling between support flanges), car manufacturing (especially for drilling in truck
chassis), bridge construction, duct construction, tunnel construction, etc.
Any use deviating from the intended use as described is considered to be improper use.
Working without personal protection equipment.
Carrying the machine by the pneumatic hose.
Operational
condition
Life phase
Transport
Start-up
Operation
Maintenance
28

INTENDED USE

IMPROPER USE

DANGER ZONES

Normal function
Transport of
the machine in
an inoperable
condition
Operating the
machine with
designated device
The machine is
only working when without intended
valve is actuated
Machine moves
tool
Operation at a Breakdown of the
service unit
USE
Malfunction Improper use
Transport of the
Drop of the
machine in an
machine
operable condition
unknown
Machine runs
Valve is blocked
while open
actuating
Tool blocks
machine
Expected use
unknown
Working without
unknown
device
unknown
unknown unknown
unknown unknown