Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and Maintenance:
1. Abrasive can be removed by pushing brass plunger
in completely, (Figure 10) and lifting abrasive from
mandrel. (Figure 11).
Figure 10
2. Clean abrasive channel and abrasive using parts
cleaner and nylon brush. Reassemble and lightly
lubricate with your favorite light oil. Note: Arbor
assembly cannot be disassembled any farther than
abrasive removal. Damage will result.
TECH TIP: Hyper-Finish Diamond Break in procedure:
Like any diamond abrasive there is a break-in period. The
diamond, when new, may not be even from end to end
or side to side (this is normal with diamond abrasives).
This does not mean you will not be able to hone a straight
guide. While honing, you will need to stroke the hone the
full length of the abrasive.
There are a couple of ways you can speed up the break-in
process.
1. Use an old straight valve guide and run the hone through
the old guide several times, making sure you use liberal
amounts of honing oil. Keep in mind that you may hone
several hundred guides before the diamond abrasive
truly gets broken in and comes into its own. Once the
diamond is fully broken in you will notice it will hone
quicker and smoother.
2. You can take our Goodson Dressing Stick, (DS-CBN)
and manually dress the abrasive evenly. Soak the
dressing stick in DHO-10 or DHO-50 oil for several hours
before using. Make sure when dressing the abrasive,
you keep the crown on the abrasive, do not fl atten it out.
Once abrasive is even you will notice a shiny line the
length of the diamond.
This will ensure a long life for your diamond abrasive!
© Goodson Tools & Supplies
Figure 11
Hyper-Finish Diamond Sizing System
Description
Master Kit
Driver head
Mandrel w/diamond
Range
7mm
.271"-.310"
5/16"
.307"-.346"
11/32"
.344"-.383"
3/8"
.350"-.389"
Replacement Diamond Abrasive
7mm
80mm long
5/16"
80mm long
11/32"
80mm long
3/8"
80mm long
Replacement Mandrels diamond abrasive sold separately
7mm
5/16"
11/32"
3/8"
Nylon Valve Guide Brushes
4.0mm
4.5 - 5.0mm
5.0 - 6.0mm
6.5 - 7mm
5/16"
11/32"
3/8"
10.0mm
11.0mm
12.5mm
Diamond Honing Oil
8 fl . oz. (236.6 mL)
1 gal. (3.78 L)
5 gal. (18.9 L)
More sizes available. Check our website or catalog.
Note: Mandrels also sold separately. You may even build your
own kit by selecting only the driver head and sizing mandrel you
need.
HF-Kit includes everything you see here
* Driver Head (HF-100)
* Mandrel with Diamond Abrasive (4 See Chart)
* Nylon Valve Guide Brushes (4 See Chart)
* 8 oz. Diamond Honing Oil (DHO-8)
Order No.
Incl.
HF-KIT
6
HF-100
x
HFM-271C
x
HFM-307C
x
HFM-344C
x
HFM-350C
x
HFS-271
HFS-307
HFS-344
HFS-350
HFM-271
HFM-307
HFM-344
HFM-350
GVP-8N
GVP-9N
GVP-10N
GVP-11N
x
GVP-1N
x
GVP-2N
x
GVP-3N
x
GVP-4N
GVP-5N
GVP-6N
DHO-8
x
DHO-10
DHO-50
January 2017
Publicidad
