Enjoy the benefit of CrossFire
Enjoy the benefit of CrossFire
Enjoy the benefit of CrossFire
Enjoy the benefit of CrossFire
Enjoy the benefit of CrossFire
Different CrossFire
feature. In below procedures, we use Radeon 2600XT as the example graphics
card. For other CrossFire
future, please refer to ATI
Step 1.
There is one ASRock SLI/XFire Switch Card factory-mounted on this
motherboard. This card served as a switch between the default mode (x16)
and CrossFire mode (x8 / x8). ASRock SLI/XFire Switch Card is factory-mounted
with its default mode (x16) side toward the retention slot base.
Step 2.
To change it to CrossFire Mode, you need to reverse the direction of ASRock
SLI/XFire Switch Card. Please simultaneously pull open both the retention
arms that hold the card in position. The card itself will spring away from the
retention slot. Take it out gently by holding its edges, and keep away from
touching the connectors (Golden Fingers).
Step 3.
Reverse the card direction so as to have the "X8 / X8 MODE" wording side
toward the retention slot base. Insert the card into the bottom of the base.
ASRock P45R2000-WiFi / P45R2000 / P45TurboTwins2000 Motherboard
TM
TM
TM
TM
TM
TM
cards may require different methods to enable CrossFire
TM
TM
cards that ATI
has released or will release in the
TM
graphics card manuals for detailed installation guide.
TM
2 1
2 1
2 1
2 1
2 1