Control Panel - ratiotec rapidcount S 575 Manual Del Usuario

[EN]

Control panel

ADD: _______________ Activate and deactivate the addition function When removing the banknotes that
BAT: _______________
CLR: _______________
AUTO: ______________ Preset mode. The machine will automatically start counting the banknotes when
MIX: _______________
SORT: ______________ Activate and deactivate the denomination function. Count sorted banknote stacks
CNT: _______________
START/CLR: _________
PRINT:______________ Print counting result via optionally available thermal receipt printer RTP 300. Is a
8
Quantity
of each
banknote
type
500 200 100
0 0
have been counted, the counting result is stored. The results from subsequent
counting processes are added. To clear the values, press the START or CLR button.
Activate and deactivate the bundle function Exact counting of banknotes (e.g.
banderols). The bundle size can be adjusted between 1 and 999 using the dial next
to the display.
Deactivate the set bundle function.
Reset counting results.
they are placed in the banknote feeder. A change from automatic to manual mode
(MAL) is possible by pressing the AUTO button.
Preset mode. Count mixed banknote stacks including value counting and checking.
including value counting and checking. The first banknote is used as a reference -
with differing types the machine stops.
Activate and deactivate the counting function. Piece counting including checking of
sorted or mixed banknote stacks (without value counting), e.g. to count foreign cur-
rencies. In CNT mode, the MG, MT and UV check can also be activated or deactivated
separately.
Reset the counting results.
Press and hold the START button to enter the date and time settings.
receipt printer connected to the printer port of the banknote counter, a receipt can
be printed by pressing the PRINT button.
Pieces
35
Value
PCS
475
50 20 10 5
0 4 6 6 19