Publicidad
DuroZone
INSTALLATION INSTRUCTIONS
RD SERIES ROUND DAMPER
TYPICAL WIRING
FOR DUROZONE DAMPERS
TO NON DUROZONE ZONING PANELS
Duro Dyne East • Bay Shore, NY 11706 • Phone: 631-249-9000 • Fax: 631-249-8346
Duro Dyne Midwest • Fairfield, OH 45011 • Phone: 513-870-6000 • Fax: 513-870-6005
Duro Dyne West • Fontana, CA 92337 • Phone: 562-926-1774 • Fax: 562-926-5778
Duro Dyne Canada • Lachine • Quebec • Canada • Phone: 514-422-9760 • Fax: 514-636-0328
©2014 Duro Dyne Corporation
Printed in USA 10/2014
BI035414
®
ROOM THERMOSTAT
R
Y
W
PT40
*
24 vac/40 VA
TRANSFORMER
Part# 35054
Standard Heat/Cool thermostat can be used to control Air Flow by
jumping terminal W and Y and then wiring to damper terminal #4.
*
Wire R on the thermostat to damper terminal #2.
www.durodyne.com
Email: durodyne@durodyne.com
MOTOR TERMINALS
24 VAC between Terminal 1 and 3 when
damper is open.
End Switch - maximum load rating - 2
amps. (usage optional)
When meter measures 24 VAC in
reference to (M1) common, wire
that transformer output to DuroZone
TRANSFORMER
Damper Terminal #2.
24 VAC
Input
24 VAC
(M1) Common
(M4) Open
NOTE: If the Zone Panel has a terminal M2
(M6) Close
or 2, wire that panel terminal to damper
terminal #2 instead of the power supply.
ALL DUROZONE DAMPERS FEATURE:
• 5 year limited warranty • Controlled bypass •
Maintenance free operation • Quick install mounting
clips (except Round Dampers) •100% factory testing •
Screwless terminals • Custom dampers and special
controls are available on request.
DUROZONE
3
4
2
1
24 vac
Meter
3
4
2
1
Publicidad
