For Your Safety; Tool Specifications; Operating Controls; Use As Intended - Wurth Master SBS 1300-VES Instrucciones Para El Manejo

SBS 1300 - D.book Seite 9 Dienstag, 27. Februar 2007 9:35 09
GB
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed. In addition, the general safety instruc-
tions in the enclosed booklet must be followed.
If the cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
The machine must not be damp and
must also not be operated in damp
surroundings.
Wear safety goggles and dust
mask.
Wear protective gloves and sturdy
shoes.
Wear safety glasses. Wear protective gloves
and sturdy shoes.
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance.

Tool Specifications

Sabre Saw
Article number
Input power
Output power
Stroke rate at no load
Stroke
Weight
Safety class

For your Safety

Keep mains lead clear from working range of
the machine. Always lead the cable away
behind you.
Connect machines that are used in the open via
a residual current circuit breaker with a trigger-
ing current of 30 mA maximum. Use only
extension cables that are intended for outdoor
use and are protected against splash water.
When the cut is completed, switch off the
machine and then pull the saw blade out of the
cut only after it has come to a standstill (danger
of kick-back).
Use only sharp, flawless saw blades. Replace
immediately cracked, bent or dull saw blades.
When working, the guide frame 2 must always
be in contact with the workpiece. Only plug-in
when machine is switched off.
The machine must be operated only with the
associated protective devices.
Do not fasten any additional labels on the
motor, the handle, or the gear.
During pauses in the work, when not in use or
during work on the machine itself (e.g., chang-
ing of the working tools, repairs, cleaning,
adjustment), pull the mains plug.
Use only original Würth parts and accesso-
ries.
For further notes on safety refer to enclosed Sheet
1 Saw blade
SBS 1300-VES
2 Guide shoe
0702 695 X
3 Clamping screw
1300 W
4 Selector switch for orbital action
600 W
5 Thumbwheel for stroke rate preselection
–1
0 – 3000 min
6 Quick-change saw blade holder
32 mm
7 Clamping lever for guide bracket
4.2 kg
Not all of the accessories illustrated or described are included
/II
as standard delivery.
This sabre saw cuts wood, plastic, and metal. It cuts
curves and can cut flush to a surface.
For damage caused by usage other then intended,
the user is responsible.

Operating Controls

Use as Intended

9