Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Crossmember
Hitch Shown In Proper Position
Equipment Required:
Fastener Kit: 75515F
Wrenches: 3/4"
Drill Bits: None
Crossmember
1
Qty. (4)
Hex Bolt 1/2-13 X 4.50
For vehicles with OEM Tow Hook: Tow hook must be permanently removed for hitch installation.
1.
Lower exhaust. (If required)
2.
Raise hitch into position.
3.
Install fasteners as shown above.
4.
Reinstall the vehicle exhaust. (If required)
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
z
2006 Cequent Towing Products
Installation Instructions
Jeep Wrangler Unlimited
Spare tire
Bumper
1
2
Tighten all 1/2-13 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Jeep Wrangler
Do Not Exceed Lower of Towing Vehicle
Manufacturer's Rating or
Hitch type
Weight Distributing
Weight Carrying
Ball Mount
Wiring Access Location: TBA
2
Qty. (4)
Conical Washer
Sheet 1 of 3
75515N
Part Numbers:
75515
44557
87424
Max Gross
Max Tongue
Trailer WT (LB)
WT (LB)
4000 (1816 Kg)
400 (182 Kg)
3500 (1589 Kg)
350 (159 Kg)
8-16-06
Form: F205 Rev A 5-6-05
Rev. A
Publicidad
Manuales relacionados para Cequent Towing Products 75515
Resumen de contenidos para Cequent Towing Products 75515
- Página 1 This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. Sheet 1 of 3 75515N 8-16-06 Rev. A 2006 Cequent Towing Products Form: F205 Rev A 5-6-05...
- Página 2 Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. Feuille 2 de 3 75515N 8-16-06 Rev. A 2006 Cequent Towing Products Form: F205 Rev A 5-6-05...
- Página 3 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York. V.E.S.C. Regulación V-5 y SAE J684 Hoja 3 de 3 75515N 8-16-06 Rev. A 2006 Cequent Towing Products Form: F205 Rev A 5-6-05...