Connecting The Power Cord - Seagate Scorpion 240 DDS-4 Manual De Instalación

A-20
Figure 7. SCSI termination examples for external
Scorpion 240
Example 1: SCSI termination
in a system that has only
external SCSI devices.

Connecting the power cord

Attach the power cord securely to the power connector on the
back of the drive. The location of the power connector on the
external drive is shown in Figure 6 on page A-19.
Scorpion 240 Autoloader Installation Manual
SCSI Terminators
External
Tape Drive
External
SCSI device
SCSI Controller
(termination enabled)
External
SCSI device
External
Tape Drive
SCSI Controller
(termination disabled)
Internal
SCSI device
( termination
enabled )
Example 2: SCSI termination
in a system that has both
internal and external SCSI
devices.