Publicidad
4. Remove the wire cover on the upper end of the upper door, change the wiring harness from
the right side to the left side, and install the left door stop to the left side of the upper door and
lower door. (the replacement of upper door and lower door stop is the same as that of lower
door, and the lower left figure will be changed to right picture)
5. Install the previously prepared lower left hinge assembly on the left, install the previously
removed leveling angle to the right, and install the lower door.
6. Install the middle hinge at the left mounting position, and install the previously removed
screw cover to the right screw hole.
16
Publicidad
