Use Environment; Door Open Alarm - MiLECTRIC RCM-330B Manual De Instrucciones

When the temperature mode keeps unchanged, adjust the air regulating rod from left to right, the

fridge temperature gets decreased while the freezer temperature increased.
When the temperature mode keeps unchanged, adjust the air regulating rod from right to left, the

fridge temperature gets increased while the freezer temperature decreased.
It is recommended to adjust the air regulating rod in the middle position. When the user needs a

lower freezer temperature, adjust the air regulating rod to the left properly, then the freezer
temperature decreases while the fridge temperature rises. When the temperature meets the
requirement, adjust the air regulating rod back to the middle position again in a timely manner.
The fridge thermostat and the air regulating rod should be used in combination.
Recommended
Use
setting on the display
environment
panel
Higher than
35℃
16℃-35℃
Lower than
16℃
When the ambient temperature around the refrigerator is higher than 35 ℃, do not set the

thermostat at Mode 2 and adjust the air regulating rod to the leftmost position, so as not to affect the
normal refrigeration of the refrigerator.
Do not set the thermostat at Mode 2 and adjust the air regulating rod to the rightmost position, in

order to avoid the fridge compartment undercooling.
If the fridge temperature is not cool or undercooled, set the thermostat at the middle mode and

adjust the air regulating rod in the middle position.
In case the 'Fastcool' function is enabled, adjust the air regulating rod to the middle position.

1.2 "FAST COOL"
Cooling down the temperature in a rapid manner is beneficial to the prevention of food nutrition against lost and the
preservation of freshness.
After a cumulative running period of 3 hours, the fast cooling function will exit automatically, with the temperature mode
restored to that set before the fast cooling function is enabled.

1.3 Door open alarm

If the fridge door is open for more than 3 minutes, buzzer alarms will be continuously issued, which can be stopped
when the set key is pressed, but will be restored after 3 minutes if the door keeps open. The alarms will not be lifted
until the door is closed.
1.4 Power cut memory
Temperature adjustment
mode
Recommended air regulating rod
position
Notes
1) It is recommended to
set at the middle mode.
2) The temperature
modes can be adjusted
as recommended in the
left table in case of
change to the ambient
temperature around the
refrigerator