Package Contents; Getting Started; Music Control - Fontastic MACARO Manual Del Usuario

GB
User Manual
Thank you for choosing this Macaro wireless headset.
Please read this user manual carefully and comply with
the safety instructions.

Package Contents

2 x wireless headset Macaro
● Storage and charging case
● USB Type-C™ cable
● 3 pairs of earbuds
● User manual
Overview:
1. Status LED
2. Multimultifunction sensor
3. Earbuds
4. Speaker
5. Charging contacts
6. Microphone
7. Cover
8. Headset insertion
9. Charging Pins
10. USB Type-C™ charging port
11. Charging LED case

Getting Started

Charging the headset
Insert the headset into the charging
case. The headsets are automatically charged in the
case. The LEDs (1) of the headsets light up red during
the charging process, the LED of the case (11) is lights
up green. After complete charging, all LEDs will turn off.
Charging the case
Connect the USB Type-C™ cable, included with the
headset, to the charging case and to a power supply
or USB port on a computer to charge the battery of the
case. The LED of the case (11) flashes red during
charging and lights up permanently when fully charged.
Switching On/Off
Switch on: Tap and hold the multifunction sensor (2) for
about 2-3 seconds.
Switch off: Tap and hold the multifunction sensor (2) for
about 5-6 seconds.
1
3
2
1
7
8
9
10
11
Note: Both headsets switch on and off automatically
when they are removed or inserted from the case.
When the headsets are switched on, the LED`s (1) flash
red and blue until both headsets are connected. After
pairing, the LED on one headset will turn off and the
LED on the other headset will flash red and blue alterna-
tely. This indicates that the headset is ready to pair with
a Bluetooth
®
Pairing
The Macaro Headset has to be paired with a Bluetooth
device before use. The LED (1) of one of the headsets
4
flashes blue and red while it is ready to pair.
1. Turn on both headsets, they will be connected
automatically via TWS.
5
Now one headset starts pairing mode to connect with
6
Bluetooth
®
2. Search for "Macaro" on your Bluetooth
select it to pair the headset with your device.
The LED of both headset will turn off after a
successful pairing.
NOTE: When pairing for the first time, it is
recommended to switch the „Macaro" TWS off and
on manually before connecting it.
Activate the Bluetooth connection from the device
only after turning it on.
Note: If the Headste does not find a Bluetooth
capable device, it switches itself off after
approx. 3 minutes.
Note:
- When the headset is placed in the charging case, the
connection is interrupted. As soon as the headset is
removed, the headset automatically reconnects.
- If the connection is interrupted, the multifunction
sensor must be pressed to reconnect.
Note for Headset Use:
All control commands are executed with the
multifunction sensor (2). The headsets can be worn
on the left or right side, therefore the direction for
control may vary.

Music Control

Play/Pause: Tap the multifunction sensor on one of the
two heasdsets once.
enabled device.
enabled device.
GB
®
device and
®
®
2