Declaration Of Conformity; Double Insulation - Casals VLIXS36 Manual Del Usuario

Atornillador a batería
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
batteries into your domestic rubbish, place them in
orably
Authorised collection places. They should never be
e and
thrown onto a fire.
- At the end of the product's useful life, and before
throwing it away in a container suitable for Electrical
ically
Appliances and Electronics Waste, remove the
batteries and throw them away in the appropriate
ps.
container.
- The product does not contain concentrations of
substances that could be considered harmful to the
hnical
environment.
other
- This appliance contains, or could contain,
epair
oil. Remember that one should abide by the
regulations concerning the elimination of this type
aged,
of contaminant.
s you
- This symbol means that in case you
S36
wish to dispose of the product once its
3.6
working life has ended, take it to an
1.0
authorised waste agent for the selective
180
collection of Waste from Electric and
6
Electronic Equipment (WEEE).
yes
5
0.33
< 80
< 12
thetic
hange

Double insulation

it is
- This symbol means that product may
include a battery or batteries; user must
this
to remove them before disposing of the
ction,
product. Remember that batteries must be
you
disposed of in duly authorised containers.
ublic
Do not dispose of them in fire.
used
- This symbol means that user
must to consult instructions
thoroughly before use.
Protect electrical power tool
from moisture
How to remove the batteries from the interior of the
device: (Fig. 5, 6)
CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
To remove the batteries, once the life of the appliance,
proceed as follows:
- Open the top shell of the apparatus, removing
previously with the help of a screwdriver fixing screws
(Fig 5)
- Identify the battery wires and cut their (Red and
Black). To avoid risks of a short circuit with a
possible residual battery load, first cut the Red wire
and protect it by using insulating tape, then proceed
to cut the Black wire proceeding in the same way.
(Fig 6)
- Safely remove the battery from its housing.

Declaration of conformity

We hereby declare, under our own responsibility,
that the CASALS products described in this manual
VLIXS36 comply with the following standards: EN
60745, EN 55014 and EN 61000-3 in accordance
with EU Directives, 2004/108/EC, 2006/42/EC,
2006/95/EC.
Alberto Tomas.
Commercial Manager

Publicidad

Tabla de contenido
loading

Tabla de contenido