Weighing In A Bowl; Automatic Switch-Off - Philips HR2395/00 Manual De Instrucciones

EnglisH
8
This button change the weight displayed from grams (g) to ounces (oz)
or from ounces (oz) to grams (g).
Weighing on the weighing plate
1 Place the ingredient or ingredients to be weighed directly on the
weighing plate. (Fig. 10)
The weight is displayed immediately.
,
Weighing in a bowl
1 Put the empty bowl on the weighing plate. (Fig. 11)
The display shows the weight of the bowl.
,
 Press the reset button 3. (Fig. 1)
The display reads 0 again.
,
 If you remove the bowl from the weighing plate, the display shows
the negative weight of the bowl (Fig. 1).
4 Put the ingredient to be weighed in the bowl. (Fig. 14)
The display shows the weight of the ingredient only.
,
The appliance shows the weight of the ingredients only (without
,
the weight of the bowl) until you reset the appliance by pressing
the reset button 3 while the weighing plate is empty. (Fig. 15)
Each time you press the reset button 3 when there is something
,
on the weighing plate, the weight on the display is set back to 0
again, irrespective of the ingredients that are already in the bowl on
the weighing plate. For example: if you have put 00 grams of sugar
in the bowl on the scales and you press the 3 button, the weight
is set back to 0. You can then easily add another ingredient, for
example 300 grams of flour, without calculating. (Fig. 16)
Features
Automatic switch-off
If you do not use the appliance for 3 minutes when it is switched on, it
switches off automatically to save battery power.