Stiebel Eltron LUS 221/301 Manual De Instalación página 7

AIR CONNECTION ON COVER
Installation
Refitting air connector
2.
f Position the air connector on the air discharge with the f
right-hand side first so that the locking hooks on the rear
side are pushed into the openings on the appliance cover.
f Press lightly to prevent the air connector from springing f
back out on the right-hand side.
f Press on the left-hand side against the edge of the air
f
connector to reinforce the curve on the rear of the air
connector.
f Look through the grille in the air connector so that you f
can see the locking hooks and pins on the rear side.
f Press the left-hand side of the air connector carefully
f
against the appliance so that the locking hooks and pins
on the rear side engage.
Fit the cap to the lateral air discharge
f Fit the cap to the air connector by engaging the locking
f
hooks inside the cover in the openings provided in the air
connector.
f Grip the small vanes on the cap with your fingers. f
f Turn the cap clockwise until it audibly engages. f
LUS 221/301
1.
!
!
| 7