Descargar Imprimir esta página

Compact Concorde Serie Manual Del Usuario página 4

Microprocessor optical tachometers

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11
General Description
The Micro-controlled Optical Tachometers consists of 2 models, both are capable of measuring
speeds from as low as 3 rpm up to 99,999 rpm (and 500,000 rpm to ± 10 rpm).
Controls:
1. Red push button
2. Yellow push button
3. 6 -way Slide switch
a) rpm measurement
b) Metres/min
c) Feet/min
d) Time interval
e) Count
f)
Accumulative
Display
On-Target Light
Auto/fixed Resolution
Fixed
Auto max.
Overrange
Underrange
Reading hold
Memory recall
Time base
Display Update time
Speed range rpm
High speed operation
Linear speeds
Measuring accuracy
Maximum resolution
Optical range
Angle of operation
Light source
Power source
Remote sensor input
Time Int.
Count mode
Accumulative Time
-
Measurement switch
-
Dual purpose:
Auto / fixed range mode
Memory recall
-
Non-contact one pulse/rev.
-
Only with remote sensor
-
contact adaptor connected, or high rpm optical
measurement.
-
measures time between successive pulse
-
counts total number of input pulses
-
measures total time of all counts
-
5-digit red LED large 11.5mm (0.4") high
brightness with full floating decimal point in
Autorange mode.
-
Green LED glows in display for accurate optical
alignment.
-
User selectable.
-
= ± 1 rpm
-
= ± 0.001
-
Display flashes on overrange
-
Display reverts to zero below 3 rpm
-
Last reading held in display for 10 seconds.
-
Last reading recalled for up to 1 minute.
(Repeat operation possible)
-
Crystal controlled.
-
0.8 seconds above 120 rpm or time between pulses
below 120 rpm.
-
3-99,999 rpm
-
500,000 rpm ±10 rpm (see note)
-
0,300-9999.99 Metres/min but Only possible
when contact adaptor and remote sensor
connected.
-
± 1 digit of reading
-
0.001 in rpm & metres/min autorange mode
-
0-1 Metre (with reflective marker)
-
±45 Degree to reflective marker (max.)
-
Visible light beam, long life lamp
-
4xMN1500 Alkaline cells
-
Standard socket fitted for external Optical
sensor.
-
0.01-99999 seconds, autoranging updated
each pulse, can be used to measure speeds
below 3 rpm by displaying seconds/rev.
-
1-99999 Count Revs or pulses or metres to 0.1
metre unit.
-
0.01-99999 seconds, total time from first to last
pulse and updated each pulse.
Allows calculation of average rate.
Page 4
Ε Ν

Publicidad

loading

Este manual también es adecuado para:

Ct6Ct6/mCt6/kCt6/crCt6/lsr