ASROCK 4Core1333-eSATA2 Manual Del Usuario página 31

STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure the RAID function, you need to check the installation
guide in the Support CD for proper configuration. Please refer to the document in the
Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration", which is
located in the folder at the following path: .. \ RAID Installation Guide
STEP 4: Install Windows
After making a SATA / SATAII driver diskette and using "RAID Installation Guide" to set
RAID configuration, you can start to install Windows
system. At the beginning of Windows setup, press F6 to install a third-party RAID
driver. When prompted, insert the SATA / SATAII driver diskette containing the Intel
RAID driver. After reading the floppy disk, the driver will be presented. Select the
driver to install according to the mode you choose and the OS you
install. You may select: "Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7R-
Windows XP/2000)" for Windows
Controller (Desktop ICH7R-Windows XP64)" for Windows
After the installation of Windows
to manage RAID functions, you are allowed to use both "RAID Installation Guide" and "Intel
Matrix Storage Manager Information" for RAID configuration. Please refer to the document
in the Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration", which
is located in the folder at the following path: .. \ RAID Installation Guide and the document
in the support CD, "Guide to Intel Matrix Storage Manager", which is located in the folder at
the following path: .. \ Intel Matrix Storage Manager Information
If you want to use "Intel Matrix Storage Manager" in Windows
please install SATA / SATAII drivers from the Support CD again so that "Intel
Matrix Storage Manager" will be installed to your system as well.
2.14.2 2.14.2 2.14.2 2.14.2 2.14.2 Setting Up a "RAID Ready" System Setting Up a "RAID Ready" System Setting Up a "RAID Ready" System Setting Up a "RAID Ready" System Setting Up a "RAID Ready" System
You can also set up a "RAID Ready" system with a single SATA / SATAII hard disk.
A "RAID Ready" system can be seamlessly upgraded to RAID 0, RAID 1 or RAID 5
at a later date by using RAID migration feature of Intel Matrix Storage. The
following steps outline how to build an Intel "RAID Ready" system.
1. Assemble the system and attach a single SATA / SATAII hard drive.
2. Set up system BIOS as step 1 of page 30. When done, exit Setup.
3. Make a SATA / SATAII driver diskette as step 2 of page 30. Begin Windows
setup by booting from the installation CD.
4. At the beginning of Windows
driver. When prompted, insert the SATA / SATAII driver diskette containing the
Intel ® RAID driver. After reading the floppy disk, the driver will be presented.
ASRock 4Core1333-eSATA2 Motherboard
®
2000 / XP / XP 64-bit OS on your system.
®
®
XP/2000 or "Intel(R) 82801GR/GH SATA RAID
® ®
2000 / Windows XP / Windows
® setup, press F6 to install a third-party RAID
2000 / XP / XP 64-bit on your
® XP 64-bit.
®
XP-64bit OS, if you want
®
environment,
®
®
3 1 3 1 3 1
3 1 3 1