Tools And Materials; Before You Begin - Kohler K-3086 Guia De Instalacion

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Safety
Tape
Glasses
Measure
Drill

Before You Begin

Observe all local plumbing and building codes.
Inspect the drain and supply tubing. Replace if necessary.
Prior to installation, unpack the new sink and inspect for damage.
To prevent damage, return the sink to its original packaging until
installation.
The cabinet and frame shown in these instructions are generic
and may not represent actual design or structure.
Before proceeding, determine how far the sink will extend
beyond the front of the cabinet. It should extend a minimum of
1/2" (1.3 cm) and a maximum of 2-3/4" (7 cm).
Shut off the hot and cold water supplies.
If possible, assemble the faucet and drain to the sink before
installing the sink.
All information in these instructions is based on the latest product
information available at the time of publication. Kohler Co.
reserves the right to make changes at any time without notice.
1035156-2-B
Plus:
1/2" or larger drill bit
Hole saw 1-3/8"
Pencil
Support frame members
Sanding block
Assorted sandpaper
Orbital sander (optional)
Sealant
2 Kohler Co.