Parallel Connection - Master audio SM SERIE Manual De Usuario

Amate Electroacústica,s.l.
Always use the mains power cable that was provided with your SM-12D8.
Do not connect SM-12D8 loudspeakers to an unearthed mains supply or by
using an unearthed mains cable.
3.CONNECTIONS

3.1. Parallel connection

You may daisy-chain as many units as required. Plug into the INPUT of the first unit
(from a Mixer's output). Then connect the LINK output (first unit) to the INPUT of the
second unit, and so on. All of the units in the chain should be switched on.
To daisy-chain connect mains power from a SM-12D8 loudspeaker to additional SM-
12D8 enclosure. Use a cable with a grey Neutrik PowerCon NAC3FCB connector at
one end and a blue Neutrik PowerCon NAC3FCA connector at the other end.
Never daisy-chain connect more than 5 SM-12D8 cabinets using the
Power Output connector.
Do not daisy-chain connect SM-12D8 enclosures using an unearthed
PowerCon NAC3FCA to PowerCon NAC3FCB cable.
Fig.4. Daisy-chain connection of SM enclosures (signal)
SM Series.Ver 1.0 Dec 08
17