How To Switch Between Devices; Troubleshooting - Steren V0808 Manual De Instrucciones

3.- For the second digit, press SET and then press number 2 key. Count
the red blinks.
4.- For the third digit, press SET and then press number 3 key. Count
the red blinks.

HOW TO SWITCH BETWEEN DEVICES

Just press the button of the desired device that you want to use (TV,
VCR, Sat, CD, VCD, DVD, Cable, Aux)
TROUBLE
Your brand is not listed in the code section
The remote control do not operate your device
(s)
The remote control is not performing
commands properly
The remote control does not respond after
pressing a key
The indicating LED does not blink when you
press a key

TROUBLESHOOTING

Try all the codes listed for your brand. Try the Automatic Search
Make sure that the correct key was pressed. For example. If you
want to control the TV set, make sure that the TV key was pressed.
You may be using the wrong code. Try the next code listed for your
brand. Start the automatic Search Method
Make sure you are using new batteries and they put on the right
position. Aim the remote control, directly to your device.
Make sure you are using new batteries and they put on the right
position.
ENGLISH-07
SOLUTION
Try the Automatic Search Method.
Method.