Cooper Lighting PWT250BR Manual De Instrucciones página 2

PWT250BR_WH 825-0156.qxd:PWT250PCW_PC I.S. 325-.qxd
Congratulations. You have purchased a Cooper Lighting, LLC 300 watt
halogen floodlight. The PWT250 is constructed of durable plastic and should
provide years of trouble free weatherproof service.
What you need
• Screwdriver
• Weatherproof silicone caulking
• (2) 150 watt (max) PAR 38 floodlight bulbs
Note: This fixture was designed to work with
up to 150 watt maximum PAR flood bulbs.
For improved energy efficiency, lower wattage
PAR or CFL Flood Bulbs can be used.
What's included
• Light fixture (A)
• Gasket (B)
• (2) Screws (C)
• (2) Wire nuts (D)
What to know
PLEASE READ THESE IMPORTANT SAFETY INSTRUCTIONS.
• For outdoor use only.
• UL and cUL LISTED for use in wet locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source (any other
connection voids warranty).
• Fixture should be mounted to a grounded junction box marked for use
in wet locations.
• Keep away from flammable objects. Do not position fixture
within one inch of any combustible materials.
• The bulb and fixture get extremely hot during use. Allow fixture
to cool completely before attempting to reposition fixture.
• Always replace bulb with the same wattage or lower wattage bulb. Installing
a bulb of a higher wattage could create a fire hazard. Use of a higher
wattage bulb will void the warranty.
• Disassembly of your fixture will void the warranty.
• Fixture should be installed by persons with experience in household wiring or
by a qualified electrician. The electrical system, and the method of electrically
connecting the fixture to it, must be in accordance with the National Electrical
Code and building codes.
Call for customer service and/or missing or damaged parts (800-334-6871)
5/19/08 5:45 PM
PWT250BR (Bronze)
PWT250WH (White)
B C
2
Page 2
A
D