Technical Specifications - Trust 71105 Manual De Instrucciones

ACM-LV10 MINI 0-10V LED CONTROLLER
EN
Read these simple guidelines. Not following them may be dangerous and faulty installation will invalidate any
warranty that may apply to this product.
COMPATIBILITY
This receiver works with all Trust SmartHome
transmitters (except TMT-502 + PIR-2050).

TECHNICAL SPECIFICATIONS

• Power supply input
• Power supply output
• RF frequency
• Memory addresses
GOOD TO KNOW
• When there is a power cut, the code of the Trust SmartHome transmitter will still be stored in the memory of
the receiver. As soon as power is restored, the receiver will switch off automatically.
Use your Trust SmartHome transmitter to switch the light back on again.
• You can control up to 5 LED drivers with built-in dimmer using 0-10 Volt control with this receiver.
WIRELESS RADIO SIGNAL
• The 433.92 MHz radio signal passes through walls, windows and doors.
• Indoor range: up to 30 m. (optimal conditions)
• The range is strongly dependent on local conditions, such as the presence of metals. For example, the thin
metal coating in Low-emissivity (Low-E) glass has a negative impact on the range of radio signals.
• There may be restrictions on the use of this device outside the EU. If applicable, check whether this device
complies with local directives.
1
FUNCTIONALITY
Receiver to control one or multiple LED drivers (max. 5)
with built-in dimmer using 0-10 Volt.
12-24V DC (power supply not included)
0-10V DC (to control 1 or multiple LED driver(s) with built-in dimmer)
433.92 MHz
6