Perlesmith PSMFK7 Instrucciones De Instalación página 5

3A-4
Mount the wall plate using 3 sets of M6 lag bolts A1 and washers A2 with a socket wrench
(not included).
STEP 3B For Concrete Wall Installation
WARNING:
Avoid potential personal injury or property damage! All lag bolts [A1] MUST BE
firmly tightened to prevent unwanted movement of the wall plate .
WARNING:
● Mount the arm assembly/wall plate directly onto the
concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x
16 in.)
3B-1
3B-2
A2
Position the wall plate at your desired
height, level the wall plate and mark the
pliot hole locations.
Drill 4 pilot holes using a 25/64
in. (10mm) diameter drill bit.
Make sure the depth is not less
than 2.56 in.(65mm).
04
25
in. (10 mm)
64
socket wrench
Wall
Anchor
A3
65mm