Bosch SL 2450 C Manual Del Usuario página 14

14
8.1 Testing the mains voltage in the unit
8.1
Disconnect the mains plug
Connect the charger to the
mains via the isolating
transformer
Set the selector switch to
" 12 V"
Mains
voltage on the selector
switch
no
Terminal 1/9?
yes
Mains
voltage on
the selector switch
no
Terminal 2/10?
yes
Set the selector switch to 0
Disconnect the mains plug
9
English
Set the selector switch to 0
Disconnect the mains plug
Check and, if necessary,
exchange the external
mains, external fuse,
socket, plug, mains supply
cable, mains electric
cutout, resistor and
internal leads
Set the selector switch to 0
Disconnect the mains plug
8.2
8.2 Testing the selector switch
8.2
Disconnect the mains plug
Detach the switch knobs
from the selector switch
and time switch
Remove the metal support
plate with selector switch
and time switch (3
sheet-metal tabs)
Switch damaged ?
yes
no
Clearly identify and
disconnect the connection
leads
Contacting
in accordance with table
?
no
yes
Connect the connection
leads as marked
Fit the metal support plate
with selector switch and
time switch (3 sheet-metal
tabs)
Slip on the switch knob
8.3
6 V
Contact
1/2 X 0
5/6 0 X
9/10 X X
3/4 X X
7/8 0 0
11/12 0 0
13/14 X X
0 = opened
X = closed
Clearly identify and
disconnect the connection
leads
Exchange the selector
switch
Connect the connection
leads as marked
Fit the metal support plate
with selector switch and
time switch (3 sheet-metal
tabs)
Clip on the switch knob
9
12 V 24 V
0
0 0 X 0 X
0 X 0 X 0
0 X X X X
0 0 0 0 0
0 X X 0 0
0 0 0 X X
0 X X X X