Operating Instructions; Deploy The Stand; Hang With The Rope Strap; Initial Setup - Hydrofarm Autopilot APCEM2 Manual Del Usuario

DEPLOY THE STAND

HANG WITH THE ROPE STRAP

INITIAL SETUP

When first unboxing, plug in the unit to the included Micro USB (or one of your own) to almost
any cell phone charger or USB power source If successfully connected, 3 things will happen while
booting up:
• 3 LEDs flash one by one
• Chart display shows the current software version & "Warm Up"
• Main display shows a countdown from 10
Once the countdown is complete, your product is ready to use No initial setup or calibration is
needed
CO , TEMPERATURE, RH READINGS
2
The device has three built-in main measureable parameters: ambient carbon dioxide (11),
temperature (9), and RH (10) They are constantly displayed on screen When any button is pressed
the APCEM2 green screen will illuminate for 30 seconds

OPERATING INSTRUCTIONS

REAR VIEW
7