Publicidad
Step 6
Fasten the RIGHT END (C) to the BOTTOM (D) and SHELF (H).
å
Tighten four HIDDEN CAMS.
Fasten six METAL BRACKETS (4G) to the ENDS (C and E) and
å
BOTTOM (D). Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the METAL BRACKETS are even with
å
the edges of the ENDS and BOTTOM.
Fasten the BASE MOLDING (M34) to the ENDS (C and E) and
å
BOTTOM (D). Use six BLACK 9/16" LARGE HEAD SCREWS (1S)
through the METAL BRACKETS on the ENDS and BOTTOM and
into the BASE MOLDING.
4G
Curved edge
D
4G
BLACK 9/16" LARGE HEAD SCREW
(12 used for the METAL BRACKETS)
Page 10
E
M34
1S
H
C
4G
418735
Maximum
Arrow
210 degrees
Minimum
190 degrees
www.sauder.com/service
Publicidad
