mundoclima MU-ECO Serie Manual De Instrucciones página 5

Before using this unit, please read these instructions completely.
Product outline:
Open doors stand for a considerable amount of the energy loss in a building.
A correctly installed AIR CURTAIN can reduce the heat loss through the door
as much as 90%. Except for the obvious energy savings in money, the AIR
CURTAINS prevents cold draught that can cause absence due to illness and
also allows shops to keep their doors open in winter time which has proven to
attract more customers. AIR CURTAINS give the slogan " a warm welcome "
a true meaning.
Instruction cautions:
1. Installation Environment:
(1) Below an elevation of 1000 meters.
(2) Ambient Temperature: over-10°C and below 50°C.
(3) Relative Humidity = 95%.
2. Installation on solid place to avoid vibrations when machine is running as
well as for safety reason, unnecessary noise caused by vibration can be
prevented. Air Curtains are used for indoor purpose and should be insta-
lled at the height of at least 2.3 m above the ground.
3. Several units can be mounted next to each other when wider openings oc -
cur. Under such condition, a narrow space in between 20-50mm for each
two units may happened.
4. Do not install Air Curtains where it is high temperature, high humidity, ex-
plosive gas and corrosive material.
5. Before installation, strong recommend to request a specialist to choose
the suitable wire and switch.
Installation:
1. Unscrew the mounting plate and take it off. (Fig. 1)
2. Insert the mounting bolts into the cement wall. Hang the mounting plate on
it and then fixed with screws. (Fig. 2)
3. Screw tightly the air curtain on the mounting plate and check. (Fig. 3, 4)
Steel mounting bolts : Nuts, spring washer, washer.
5