in2aqua Edge Instructiones De Montaje Y De Uso página 10

For the Plumber
Para el instalador
White plastic spring retainer cap removal and replacement
1
Remove black plastic mud guard from pressure
balance valve (held in place by 2 screws).
1
Remove black plastic mud guard from pressure
balance valve (held in place by 2 screws).
2
Remove second black plastic mud guard from diverter stem.
2
Remove second black plastic mud guard from diverter stem.
3
Locate metal diverter sleeve and knob in a plastic bag in trim kit.
Unscrew metal diverter sleeve from knob. Keep both parts ready
for installation.
3
Locate metal diverter sleeve and knob in a plastic bag in trim kit. Locate metal diverter sleeve and knob in a plastic bag in trim kit.
Unscrew metal diverter sleeve from knob. Keep both parts ready
Unscrew metal diverter sleeve from knob. Keep both parts ready
for installation. for installation.
4
Unscrew white plastic spring retainer cap from the brass
diverter stem of the pressure balance valve.
Be careful not to damage diverter stem.
4
Remove white plastic spring retainer cap from the brass
Unscrew white plastic spring retainer cap from the brass
diverter stem of the pressure balance valve.
diverter stem of the pressure balance valve.
Be careful not to damage diverter stem.
Be careful not to damage diverter stem.
5
Do not lose spring. Discard white plastic spring retainer cap.
5
Do not lose spring. Discard white plastic spring retainer cap.
6
Screw the metal diverter sleeve of the trim kit on to the
brass diverter stem of the pressure balance valve.
6
Screw the metal diverter sleeve of the trim kit on to the
brass diverter stem of the pressure balance valve.
Diverter spring retainer removal
Diverter spring retainer removal
1
1
2
2
3
3
4
4
5
5
6
6
10
10
10