Publicidad
Idiomas disponibles
Idiomas disponibles
DTCXSR01 - v1 - ENGLISH
Key Operated Rotative Selector
EMSR03
1- DESCRIPTION
Program switch used to select an operating mode when connected
to an Activa+ operator (this product is not compatible with Bravo
operator). The operating modes available are:
Automatic
AUT
Opened
Closed
Exit only
3- PACKAGING AND ASSEMBLY
3a.- The box contains the following elements:
7
8
1.- Wall fixing housing.
2.- Mounting plate.
3.- Front cover.
4.- Self-adhesive mask.
5.- Bowler nut.
6.- Fixing screw D-7981 3.2x6.5.
7.- Connection wire.
8.- Bowler and electric circuit.
3b.- Wall fixing:
1.- Insert the wire (7) through the plastic housing (1).
2.- Screw the mounting plate (2) to the plastic housing (1) as shown
on the drawing.
AUT
4
3
6
5
2
1
EN
M
KEY OPERATED ROTATIVE SELECTOR EMSR03
2- TECHNICAL FEATURES
- 4 positions at 90 degrees.
- The key can be removed from any position.
- Can be fixed to the wall or front cover.
- Life: up to 10.000 operations.
3.- Insert the nut (5) through the bowler (8) and tighten firmly.
4.- Insert the bowler (8) through the front cover and tighten the nut (5).
5.- Connect the wire (7) to the electric circuit on the bowler (8).
6.- Clip the front cover (3) and bowler (8) onto the mounting plate (2).
7.- Stick the self-adhesive mask (4) to the front cover (3).
Remark: For a correct performance, the position of the mounting
plate and the bowler must be exactly as shown on the drawings.
01
Publicidad
