Masterpro OKV Manual De Instrucciones página 2

EN
User manual
Open the battery cover on the bottom of the scale and Insert 2 batteries of type AA / R6. Please
ensure that the polarity is correct (see the floor of the battery compartment) ! Close the battery
OKV
cover again.
Display Indication
Stainless digital kitchen scale with 1.6 litre stainless bowl
"Lo" Battery low. If the display screen reads "Lo", it means the batteries need to be changed.
"Err" Overload. if the display screen reads "Err",it means the weight exceeds the maximum
capacity of 5kg.please immediately remove the critical load to avoid cell damage.
Weight range: 5g-5kg
Switching On
Place the scales on a flat, and hard surface.
Division : 1g
Press the ON/Z/T button. the display screen reads "8888". after the scale leveled off, the
LCD display window size :48*18mm
indication will be "0g".now the scale is ready to use.
Available unit : g,lb:oz,ml, fl.oz.
Overload/Low battery indication
Weighing
Auto off function
Use the UNIT button to select the desired unit of measurement: "g", "lb:oz", "ml" or "fl.oz".
Power supply : 2XAA Fill the scale with the ingredients to be weighed. The result will be displayed.
Tare Function
If you would like to add a further ingredient to the last ingredient and then weigh it:
Press the ON/Z/T button ,the scales is reset to "0".If you place further ingredients on the scales
right no w, their weight is displayed.
Switching Off
If the scales is not used , the scales turn off automatically after approximate 1 minutes.
If you want to turn off the scales earlier, please press and hold the ON/Z/T button for approx. 3
seconds.
Notice:
Strong electromagnetic fields (e .g. cell phones) may impair the accuracy of the scales.
The scales are for domestic use only, and no for commercial purposes.
If you do not use the appliance for a longer period of time, remove the batteries in order to
prevent"leakage" of battery acid.
The maximum capacity of the scales is:5kg. Do not exceed.
Do not immerse the appliance in water: the electronic components will be damaged.
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
Clean the device with a smooth and moist cloth. Make sure that no humidity or water seeps into
the device! Dry the device thoroughly after cleaning with a dry and soft cloth.
Before making a claim ,please check the batteries and replace them if necessary.