- Do not let cord hang over edge of table or counter, or touch hot
surfaces.
- To disconnect, turn any control to `off`, then remove plug from wall
outlet.
- Keep hair, clothing, and jewelry, as well as spatulas and othe utensils,
away from food chute during operation to prevent the possiblity of severe
injury to persons and/or damage to the appliance.
- Do not wash grating sieve in an automatic dishwasher. If bent or
damaged, do not use, as it could break into small pieces and cause
personal injury and/or damage the appliance.
- Wash all detachable parts before using it.
SAVE THESE INSTRUCTIONS!
INSTRUCTIONS FOR USE
1. Assemble the appliance according to the structure.
2. Place the pulp bin in place; then close it and be sure it snaps into
place.
3. Insert the spout cover into the seperator. Place the seperator onto the
motor base.
4. Lay the grating sieve into the seperator and pres s it down slightly.
5. Put the cover in place and close the locking handles tightly with both
hands.
6. Put the juice container underneath the juice spout.
7. Put the plunger into the food chute. Pay attention on the derection
symbol on the plunger and put it into the food chute to the same direction
symbol shown on the food chute.
HOW TO USE THE SWITCH
Move the rotary switch to the desired setting.
Pulse for Pulse switch for required blending duration
Off for Stop
1 for Low speed setting
2 for High speed setting
1. Wash the fruits /vegetables well, peel fruit such as lemon, mango, kiwi,
melon, and pineapple.
2. Remove the cores of e.g. apples. And remove the stone, seeds, pips
from prunes, apricots peaches, etc. Tiny seeds such as those found in
kiwi fruit, strawberries may be ignored.
All manuals and user guides at all-guides.com
HOW TO ASSEMBLE
HOW TO USE