Using Your Iron - Hamilton Beach Steam Storm 14560T Manual Del Usuario

840091301 ENv02 10/5/07

Using Your Iron

To Dry Iron
1. Plug iron into outlet.
2. Set the Adjustable Steam Knob
To Steam Iron
1. Unplug iron. Turn Adjustable Steam
2. Using a cup, slowly pour 6 ounces
of tap water into water tank opening.
Do not fill iron directly from the
faucet.
3. Plug iron into outlet. Set iron upright
on heel rest.
4
8:24 AM Page 4
3. Turn Temperature Control Dial to
to ( Dry Iron).
4. To turn iron Off, turn Temperature
Control Dial to Off and unplug iron.
4. Turn the Temperature Control Dial to
Knob to (Dry
desired fabric setting in the steam
Iron). Place iron
range.
soleplate on flat
5. Allow two minutes for the iron to
surface. Open
reach desired temperature.
Water Fill Cover.
6. Set Adjustable Steam Knob to the
7. To turn iron off, set Adjustable
Steam Knob to
the Temperature Control Dial to Off.
Unplug iron.
8. Empty water from the iron following
directions in "Caring for Your Iron."
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
desired temp-
erature. Allow
two minutes for
iron to reach
desired
temperature.
recommended
steam level. See
the "Fabric
Setting Chart."
(Dry Iron). Turn