Irritrol LIFE 4 Guida Rapida página 9

PROGRAMMING
Setting Program Start Time
The program start time is the time of day you select to begin an automatic watering
program cycle.
When a program starts, each station with a designated run time duration in the program
will operate in numerical order, one station at a time.
Sometimes it is necessary to run a watering program more than once per day. For
example, when watering a new lawn.
The LIFE Controller provides 3 independent start times per day for each program.
1. Turn the control dial to the Start Time position
2. Press P+ or P- buttons to select the desired program A or B. The selected Start Time
number and the program letter A or B will be displayed.
3. Press either the or button to select the desired Start Time number: 1, 2 or 3.
4. Press either the or button to set the start time.
.
5. Repeat steps 3 and 4 for each Start Time number, as needed.
• To remove a Start Time from the program, decrease the Start Time below 12:00AM
(0:00) or increase it above 11:59PM (23:59).
6. Repeat steps 2–5 for each program as needed.
7. Press the Auto button when finished.
Irritrol LIFE Controller 4 _ 6 _ 8
9